manualshive.com logo in svg

Xerox ColorQube 9301, User Manual

Share
Download
Xerox ColorQube 9301 User Manual Download Page 226

Operational Safety Information

ColorQube 9301/9302/9303 Multifunction Printer

User Guide

226

Operational Safety Information

Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements. 

These include safety agency examination, approval, and compliance with established environmental 

standards.

To ensure continued safe operation of the Xerox equipment, follow these safety guidelines at all times:

Electrical Supply

This section provides important electrical supply safety information to read before installing or using 

the printer.

Read the information in the following sections:
•

Power Outlet Electrical Safety 

on page 226

•

Power Cord Electrical Safety 

on page 226

•

Equipment Safety 

on page 227

•

Emergency Power Off 

on page 228

•

Disconnect Device 

on page 228

Power Outlet Electrical Safety

This equipment must be operated from the type of electrical supply indicated on the data plate label 

on the rear cover of the equipment. If you are not sure that the electrical supply meets the 

requirements, consult the local power company or a licensed electrician for advice.

Ensure the electrical supply outlet is near the equipment and easily accessible.

WARNING: 

This equipment must be connected to a ground fault interrupter. This equipment is 

supplied with a plug that has a protective earth pin. Only this plug fits into an earthed electrical 

outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact a 

licensed electrician to replace the outlet. Always connect the equipment to a correctly grounded 

power outlet. If in doubt, have the outlet checked by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in electrical shock.

Power Cord Electrical Safety

•

Use only the power cord supplied with this equipment.

•

Plug the power cord directly into a grounded electrical outlet. Do not use an extension cord. If you 

do not know if an outlet is grounded, consult a qualified electrician.

•

Do not place this equipment where people can step on or trip on the power cord.

•

Do not place objects on the power cord.

Summary of Contents for ColorQube 9301





































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands