Xerox ColorQube 9301, User Manual

Page: 248 / 260

General Care
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
248
The staple cartridges for the Office Finisher and the High Volume Finisher contain 5000 staples. The
High Volume Finisher with Booklet Maker has two additional staple cartridges located within the
Booklet Maker module. Each of these cartridges holds 2000 staples.
Detailed instructions are provided on the touch screen. Follow the instructions and labels provided
when replacing the staple cartridge.
Office and High Volume Finisher Staple Cartridge:
1. Open the finisher door.
2. If using the Office Finisher, rotate the
staple access handle (a green cog)
clockwise until the staple unit is
accessible.
3. Unlatch the staple cartridge by using
the light-colored catch and remove
the used staple cartridge.
4. Dispose of the staple cartridge
according to the instructions
contained in the new staple cartridge
box.
5. Unpack the new staple cartridge and install it into the finisher. The staple cartridge clicks into
place.
6. If using the Office Finisher, rotate the staple access handle (the green cog) counterclockwise until
it is back in position.
7. Close the finisher door.
High Volume Finisher Booklet Maker Staple Cartridges:
1. Open the finisher door. Pull out the booklet maker module.
2. Lower the lever to gain access to a staple cartridge. Grip the staple cartridge and pull it out of the
staple head.
3. Dispose of the staple cartridge according to the instructions contained in the new staple cartridge
box.
4. Unpack and install the staple cartridge in the finisher. The staple cartridge clicks into place. Repeat
the procedure for the other booklet maker staple cartridge.
5. Push in the booklet maker module and close the finisher door.