Xerox ColorQube 9301, User Manual

Page: 228 / 260

Operational Safety Information
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
228
Emergency Power Off
If any of the following conditions occur, turn off the equipment immediately and disconnect the power
cables from the electrical outlets. Contact an authorized Xerox Service Representative to correct the
problem:
•
The equipment emits unusual odors or makes unusual noise.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has been tripped.
• Liquid is spilled into the equipment.
• The equipment is exposed to water.
• Any part of the equipment is damaged.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the printer as
a plug-in device. To remove all electrical power from the equipment, disconnect the power cable from
the electrical outlet.
Maintenance Information
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when
used on electromechanical equipment.
• Any operator product maintenance procedures are described in the user documentation supplied
with the product.
• Do not carry out any maintenance on this product that is not described in the customer
documentation.
• Use supplies and cleaning materials only as directed in the user documentation.
• Do not remove covers or guards fastened with screws. There are no parts behind these covers that
you can consider for maintenance or service.
Consumables Information
• Store all consumables in accordance with the instructions provided on the package or container.
• Keep all consumables away from the reach of children.
• Cartridges: When handling cartridges, avoid skin or eye contact that can cause irritation and
inflammation. Do not attempt to disassemble the cartridge. This can increase the risk of skin or
eye contact.