Safety
Revision: 02
PCO
−
D010_E
Page 11 / 54
The pump is not filled with engine oil at the time of engine startup
Irreparable damage to the pump
Ĥ
Before starting the engine, make sure that the pump has been filled with the appropri
−
ate engine oil.
Ĥ
Only use the engine oil according to the engine manufacturer’s documentation.
Touching polished or lapped surfaces with bare hands
Corrosion of surfaces
Ĥ
Wear safety gloves.
Improper handling of cable connections
Severe damage to the cable connection
Ĥ
Do not use cables to carry the parts.
Ĥ
Do not pull the cables.
Components falling to the ground
Damage to components
Ĥ
Remove components carefully during disassembly.
Ĥ
Set up a collector below the working area.
Tension of cables
Damage to components and cables
Ĥ
Assemble cables and fastening points tension
−
free.
Ĥ
Observe the installation location and position of components and cables.
2.4.3
Electrical hazards
High voltage
Death or life threatening injuries by fatal electrical shock
Ĥ
Complete tests on non
−
conductive materials.
Ĥ
Do not touch conductive materials during process.
Ĥ
Separate injectors from conductive materials.
Disconnect electrical connections during operation
Death or life threatening injuries
Ĥ
Do not disconnect electrical connections during operation.
Ĥ
Make sure sources are deenergized before disconnection.
Tripping over power cables
Slight and medium injuries
Ĥ
Monitor the work environment at all times.
Ĥ
Make sure power cables are covered with mats.
Summary of Contents for X35-B
