Winterthur Gas X35-B, Maintenance Manual

Page: 248 / 547

Maintenance
3303 − 4/A1
Winterthur Gas & Diesel Ltd.
2/ 8
16) Attach the stop plate (94335, Fig. 2 ) to
the bearing cover (3) and the guide
shoe (2).
17) Attach the eye bolts (EB2) to the
bearing cover (3).
18) Attach the platform elements as shown
in 3301 − 1 .
2. Removal
WARNING
Injury Hazard: The
connecting rod weighs
557 kg. To prevent injury,
be careful when you move
the connecting rod.
1) Remove the round nuts (4) from the top
end bearing, refer to 9403 − 4 .
2) Attach the eye bolts (EB1) to the cylinder
block (1).
3) Attach the manual ratchets (H1, H2) to
the eye bolts (EB1).
4) Operate the manual ratchet (H1, H2) to
lift the crosshead abve the bottom
position in the column (5).
5) Attach the two supports (94322) to the
bottom position in the column (5).
6) Torque the two screws (6) and the
screw (7) to 150 Nm.
7) Lower carefully the crosshead (9) on to
the two supports (94322).
8) Adjust the two screws (8) to get an equal
load.
9) Attach the manual ratchets (H3, H4) to
the shackle on the tools (94337).
10) Remove the support (94332).
2017
Removal and Installation Piston Installed
Fig. 2
EB1
H2
94333
WCH00575
1
H1
EB2
94335
EB2
WCH00575
3
2
4
H1, H2
H3
94337
94337
94332
WCH00575
7 6
94322
WCH00574
8
5
H4
9