Winterthur Gas X35-B, Maintenance Manual

Page: 297 / 547

Maintenance
3403 − 2/A1
Winterthur Gas & Diesel Ltd.
3/ 3
8) Remove the platform elements (94143,
94144).
Note: During step 7 ), make sure that the
piston rod foot touches the
crosshead.
9) Operate the turning gear to move the
piston down to BDC.
10) Install the platform elements (94143 and
94144 as applicable).
11) Put oil on the threads of the four nuts (1,
Fig. 4 ).
12) Attach the four nuts (1) to the crosshead.
13) Torque the four nuts (1) to 1 20 Nm.
4. Completion
1) If the new compression shim is thicker
than the removed item, remove
unwanted material from the cylinder
liner bore, refer to 2124 − 3 paragraph 2
and paragraph 3 .
Note: Refer to data between the new
compression shim and the related
setting screw (ST) on the gauge
shown in 2124 − 1 .
2) Remove all tools and equipment from
the work area.
2017
Piston: Compression Shims − Change
Fig. 4
1
I
I
2
94143
94144