Winterthur Gas X35-B, Maintenance Manual

Page: 98 / 547

Maintenance
1132 − 2/A1
Winterthur Gas & Diesel Ltd.
2/ 15
2. Preparation
1) Set to off the main oil supply pumps.
2) Stop the oil lubrication to the main
bearing.
3) Remove the top part of the casing (1,
Fig. 1 )
4) Remove the oil pipe (1, Fig. 2 ) from the
main bearing cover.
5) Remove the round nuts (2) from the
main bearing cover (3), refer to 1132 − 1 .
6) Install the device (94811F, Fig. 3 ).
7) Do a check of the bearing clearance
(refer to 0330 − 1 ). Record the clearance
8) Attach the eye bolt (EB1) to the column
in the position shown.
9) Attach the manual ratchet (H2) to the
eye bolt (EB1).
3. Thrust Device − Install
WARNING
Injury Hazard: Do not use
the thrust device (94110)
as a lifting device. Injury to
personnel can occur.
CAUTION
Damage Hazard: Use the
thrust device (94110) only
for the removal of the main
bearing covers. Damage to
equipment can occur if you
use incorrect equipment
2017
Main Bearing − Removal and Installation
Fig. 1
Fig. 2
1
Fig. 3
94118F
94110
EB1
H2
1
1
3
WCH00597
2