Winterthur Gas X35-B, Maintenance Manual

Page: 323 / 547

Maintenance
4104 − 3/A1
Winterthur Gas & Diesel Ltd.
1/ 5
Driving Wheels
Crankshaft Gear Wheel − Replace
Tools:
1 Ring slugging wrench 94002 − 41 Applicable lifting equipment
1 Feeler gauge 94122
1. General 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Preparation 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Assemble 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. Procedure 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. Completion 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. General
Usually, the crankshaft gear wheel (gear wheel) is designed as one part. If it becomes
necessary to replace the gear wheel, you must do the procedures that follow:
When when you order a 2-part spare wheel, you must give the engine type, engine
number, and the engine supplier. This data is necessary because the the hole of the
2-part gear wheel is made in accordance with these dimensions.
1) Remove the intermediate wheel, refer to
4104 − 2 .
2) Divide the gear wheel (5, Fig. 1) into two halves.
3) Disassemble the gear wheel (5).
Note: To prevent damage, you must get the applicable instructions from the
engine supplier, or Winterthur Gas & Diesel Ltd.
Fig. 1
2
5
4
3
4
2
d
1
1
WCH03665
2017