Winterthur Gas X35-B, Maintenance Manual

Page: 434 / 547

Maintenance
8752 − 1/A1
Winterthur Gas & Diesel Ltd.
4/ 7
8) Remove the screw (9, Fig. 3 ) loosened
before.
9) Remove the applicable fuel pipe (1).
10) Remove and discard all O-rings.
3. Installation
1) Lubricate the new O-rings (2, 3).
2) Attach the new O-rings (2, 3) to the HP
fuel pipe (1).
3) Make sure that there is a distance of
4.0 mm between the end of the HP fuel
pipe (1) and the claw (2).
4) Lubricate the new O-rings (7, 11) with oil.
5) Apply Never Seez NSBT8 to the threads
of the four screws (4) and the screw (9).
6) Attach the new O-rings (7, 11) to the
screw (9).
7) Put the screw (9) in position.
8) Put the HP fuel pipe (1) in position.
9) Torque the screw (9) to 250 Nm.
10) Torque the four screws (4) to 20 Nm.
11) Attach the fuel leakage pipe (8) to the
sleeve (5).
12) Attach the sleeve (5) to the screw (9)
with the circlip (6).
2017
HP Fuel Pipe: Removal and Installation
Fig. 3
1
IV - IV
VII - VII
9
1
11
7
10
7.0 mm
8
6
5
V - V
3
2
4.0 mm
1
WCH03792
WCH03792
4 1
WCH03792
WCH03792