Winterthur Gas X35-B, Maintenance Manual, Page: 386 / 547

Maintenance
6545 − 1/A1
Winterthur Gas & Diesel Ltd.
2/ 4
2. Preparation
1) Stop the engine.
2) Set to off the power supply.
3) Disconnect the electrical connections
from the electric motor.
4) Read and obey the data in 0012 − 1
General Guidelines for Lifting Tools.
3. Removal Procedures
3.1 Top Auxiliary Blower
1) Attach the sling (94435C, Fig. 2 ) to the
center of gravity of the auxiliary
blower (1).
2) Attach the manual ratchet (H2) to the
strong-point (3) on the exhaust manifold
and the sling (94435C).
3) Apply a light tension to the manual
ratchet (H2).
4) Attach the manual ratchet (H3) to the
strong-point (5) and the sling (94435C).
5) Remove the 12 screws that attach the
auxiliary blower (1) to the casing (3).
6) Operate the manual ratchet (H3) to
remove the auxiliary blower (1) from the
casing (2).
7) Remove the manual ratchet (H2) from
the sling (94435C).
8) Attach the manual ratchet (H1) to the
strong-point (4) and the sling (94435C).
Note: If necessary, disassemble the
impeller.
9) Operate the manual ratchets (H1, H3) to
move the auxiliary blower (1) away from
the engine.
10) Lower the auxiliary motor (1) on to an
applicable support to prevent damage to
the impeller.
2017
Auxiliary Blower: Maintenance
H1
H3
H2
1
2
4
3
5
94435C
Fig. 2
94435C
WCH00586