Winterthur Gas X35-B, Maintenance Manual, Page: 266 / 547

Maintenance
3303 − 5/A1
Winterthur Gas & Diesel Ltd.
2/ 4
2. Removal
1) Use the pre-tensioning jack (94315) to
loosen the four round nuts (3, Fig. 2) ,
refer to 9403 − 4 .
2) Remove the four round nuts (3) from the
elastic bolts (2).
3) Attach the two eye bolts (94045-M16) to
the bearing cover (1).
4) Attach the chain (94335D) to the two eye
bolts (94045-M16).
5) Attach the two shackles (94572H, Fig. 3 )
to the strong-points on the frame.
6) Attach the two manual ratchets
(94016F) to the shackles (94572H).
7) Attach the two manual ratchets
(94016F) to the chain (94335D). Make
sure that the chain lengths of the manual
ratchets are equal.
CAUTION
Damage Hazard: Before
you operate the manual
ratchets, make sure that the
chain is vertically aligned
with the center of the
bearing cover. This will
prevent damage to the
elastic bolts.
8) Operate the two manual ratchets
(94016F) to carefully lift the bearing
cover (1).
2017
Top End Bearing Cover − Removal and Installation
Fig. 2
WCH02662
94335D
94045 − M16
2
1
3
Fig. 3
94016F
1
94572H
WCH03653
94335D
94016F
94572H