Maintenance
1132
−
2/A1
Winterthur Gas & Diesel Ltd.
6.3
Bearing Shell No. 1
−
Removal
CAUTION
Damage Hazard: Do not
remove two adjacent main
bearing shells at the same
time. Damage to the engine
can occur.
1) Make sure that the crankshaft is lifted
to 0.15 mm. Refer to paragraph
and
paragraph
2) Attach the manual ratchet (H2,
to the eye bolt (EB1).
3) On the exhaust side, remove the Allen
screw (4) from the bearing girder.
4) Attach the device (94118) to the bearing
shell (3).
5) Put the wire ropes (2) along the outer
edges of the the bearing shell to the
other side. Attach the wire ropes to the
device (94118) on the other side as
shown.
6) Use the plate (94119) and the M10x30
screws to hold the ropes in position.
7) Torque the M10x30 screws to 40 Nm.
8) Attach the manual ratchet (H2) to the
device (94118).
9) Operate the manual ratchet (H2) to turn
the bearing shell (3)
Note: If the bearing shell (3) does not
move, the device (94119) must be
attached to the other side. The
bearing shell must be moved back
to its initial position and the
removal procedure done again.
Main Bearing
−
Removal and Installation
2017
EB1
H2
94118
I
I
94119
94118
I
I
II
3
2
1
4
Fig. 12
EB1
H2
94119
4
94118
Summary of Contents for X35-B
