background image

R 1 7 2 5   M O T O R   A S S E M B LY

R 1 7 2 5   M O T O R 

F O R   U S E   W I T H   R 1 7 3 0   &   R 1 7 3 5   R E M O T E   C O N T R O L S

programming instructions

CONTROL RANGE
Transmitting distance may be affected due to environment.

 

L1

Rolling

L2

Rolling

L1 Open

L2 Partition

Emission frequency

100V-240V

200m

35m

433.92/868 MHz

Insert motor into the roller tube.

INSTALLATION

Manufacture the blind according to instructions and fit using brackets supplied.

DRIVE ADAPTER INSTALLATION

 

Place crown

Motorplate

Slide the crown up the tube to the control 

end.

Drive

Crown

Drive

Screw the drive to the opposite end 

and fit Circlip.

 

1)

2)

3)

Blue=Neutral

Red=Live

Summary of Contents for R1725

Page 1: ...t L1 Rolling L2 Rolling L1 Open L2 Partition Emission frequency 100V 240V 200m 35m 433 92 868 MHz Insert motor into the roller tube INSTALLATION Manufacture the blind according to instructions and fit using brackets supplied DRIVE ADAPTER INSTALLATION Place crown Motorplate Slide the crown up the tube to the control end Drive Crown Drive Screw the drive to the opposite end and fit Circlip 1 2 3 Bl...

Page 2: ...p Press and hold the stop button down until the motor jogs this will set the lower limit Setting is complete For more blinds select another channel on the remote and repeat from Step 2 Down button Channel Stop Button Up Button LCD Screen Channel Setting Button STEP 3 SETTING A THIRD POSITION Move the blind using the Up and Down buttons on the remote to the desired position press Stop Press Stop fo...

Page 3: ...he remote and repeat step 2 Down Button Channel Setting Button Channel Setting Button Stop Button Up Button STEP 3 SETTING A THIRD POSITION Move the blind using the Up and Down buttons the remote to the desired position press Stop Then O and together followed by the Stop button twice more this will cause the motor to do 2 jogs and beep To operate the third position press and hold the Stop button a...

Page 4: ...wered on 14 Do not operate the blinds during maintenance such as window cleaning is being carried out in the vicinity etc 15 The power supply cord should not be exposed to sunlight or rain directly during installation H05VV of the motor power supply cord can only be used for indoor installations H05RR or H05RN rubber power cable can be used in outdoor installation black ordinary tough rubber sheat...

Reviews: