W6 N 9500C QPL, Manual

Page: 120 / 281

Utility stitches
Using a pattern
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, further
information can be found on www.w6-wertarbeit.de under Service / HELP:
Criteria for optimal threading.
The lower thread has been pulled taut and carefully to the 7 o’clock and 9 o’clock
positions in the silver slot of the black hook race. When pulling it in, you will hear
a definite clicking at the 7 and 9 o’clock positions.
The lower thread tension is active. You have performed a tension test.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, you can
obtain information on www.w6-wertarbeit.de under Service / HELP / W6 N
9500 Criteria for optimal threading.
Press the Needle Up / Needle Down button once,
if the presser foot is up.
Select the following settings:
Designation
Needle
position Prog.
No. Pattern Application Presser
foot Needle size
Zigzag stitch 006 Zigzag stitch W6 Super
Stretch 90 or
75 needles
(HAx1SP)
Thread tension setting
Zigzag stitch settings
W6 note
The stitch length and stitch width must be changed manually in the specified
ranges.
PLEASE NOTE
If the stitch pulls together on the fabric, you must reduce the stitch width and
stitch length.
W6 tip
Previously, the zigzag stitch was used for overcasting, when there were not any
stretch fabrics available. Good alternatives are the oblique straight stitch, the
overlock / overcasting stitch or the stretch zigzag stitch.
120