W6 N 9500C QPL Manual Download Page 8

Page: 8 / 281

Notes for operational safety

Safety notes

This section contains information on how to use the manual:

•

Notes for operational safety (Section 1.1)

•

Instructions for use (Section 1.2)

•

After sewing (Section 1.3)

•

Tips for a long service life (Section 1.4)

•

What we expect from you (Section 1.5)

1.1

Notes for operational safety

The machine has been carefully designed and is safe.

Nevertheless, hazards may arise from the machine.

•

If the machine is not used as intended.

•

If the machine is used for an improper application.

•

If the machine is operated under impermissible conditions.

For this reason, please take note of the instructions in the following sections so
that you can work safely and enjoyably.

Summary of Contents for N 9500C QPL


























































































































































































































































































Search results

Summary of Contents for N 9500C QPL

Reviews:

W6 N 9500C QPL, Manual, Page: 8 / 281

Search results

Summary of Contents for N 9500C QPL

Reviews: