W6 N 9500C QPL, Manual

Page: 167 / 281

Sewing on buttons: program 021
Using a pattern
11.11 Sewing on buttons: program 021
Standard foot,
Super Stretch 90 or 75 needle
You can sew on buttons of various sizes using this stitch.
Select the following settings:
Designation
Needle
position Prog.
No. Pattern Application Presser
foot Needle size
Sewing on
buttons 021 Sewing on buttons W6 Super
Stretch 90
or 75
(HAx1SP)
Thread tension setting
Sewing on buttons settings
Prerequisite:
•
You have read the safety notes for this sewing machine, see “Safety
Notes”.
•
You have set up the machine in a safe place; see “Setting Up”.
•
You have connected the machine properly, see “Connecting the machine”.
•
You have threaded the sewing thread properly, see “Threading the upper
thread”. In this regard, also view the “Criteria for optimal threading of a
W6 N 9500 QPL” video that is just 4 minutes long under Service / Help on
our website at www.w6-wertarbeit.de.
•
Use a W6 Super Stretch 90 (HAx1SP) needle for stretch and non-
stretch fabrics or a W6 Super Stretch 75 (HAx1SP) needle for thinner
fabrics. If necessary, install a special needle.
•
You are using W6 plastic bobbins and thread tension-friendly and lint-free
W6 thread.
•
The presser foot that matches the pattern is installed.
Carry out the following steps:
1. Set the ‹presser foot lifter› to the upper position.
Then press the ‹Needle Up / Needle Down› button once.
W6 note
Please note: It must be ensured that the thread take-up lever, covered by the
face plate, and the needle are in a specific position before threading and
changing any programs.
Set the Presser foot to the upper position, the thread tension is then open. Press
the Needle Up / Needle Down button once. The thread take-up lever and needle
move to the correct starting position automatically.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine.
167