W6 N 9500C QPL, Manual

Page: 16 / 281

Unplugging the power plug
Assembling the machine
6. Slowly press the ‹foot controller› to start sewing.
! The further the ‹foot controller› is pressed, the faster the machine
sews.
Alternatively, you can sew without the foot controller, just unplug the foot
controller. Start and stop the sewing machine using the
‹Start-Stop›
button. Give it a try, you’ll be amazed.
7.
Release
the ‹foot
controller› when you want to stop sewing.
Alternatively: Unplug the foot controller and start and stop the sewing
machine using the
‹Start-Stop› button. You can control the speed using
the Speed Control button.
8. Set the ‹on / off switch› to the “0” (OFF) position to switch the machine
off.
» The machine is connected.
2.4 Unplugging the power plug
In the following situations you should switch the machine off at the ‹on / off
switch› and pull the plug out of the socket:
•
If the machine is left unattended.
•
If you are replacing the needle or bobbin.
•
If you are removing the covers.
•
If a power failure occurs during use.
•
During thunderstorms.
16