W6 N 9500C QPL, Manual

Page: 117 / 281

Utility stitches
Using a pattern
Use a W6 Super Stretch 90 (HAx 1SP) needle for stretch and non-stretch fabrics,
or a W6 Super Stretch Needle 75 (HAx1SP) for thinner fabrics. Never use a
jersey needle, as a jersey needle may pull the fabric into the needle plate.
Select the following settings:
Designation
Needle
position Prog.
No. Pattern Application Presser
foot Needle size
Straight stitch
centre 001 Topstitching seams W6 Super
Stretch 90 or
75
(HAx1SP)
Straight stitch
variable
Needle
position
from far left to
Far right
setting 002 Topstitching seams,
variable adjustment
of needle position
using the stitch width W6 Super
Stretch 90 or
75 needle
(HAx1SP)
Thread tension setting
Prerequisite:
•
You have read the safety notes for this sewing machine, see “Safety
Notes”.
•
You have set up the machine in a safe place; see “Setting Up”.
•
You have connected the machine properly, see “Connecting the machine”.
•
You have threaded the sewing thread properly, see “Threading the upper
thread”. In this regard, also view the “Criteria for optimal threading of a
W6 N 9500 QPL” video that is just 4 minutes long under Service / Help on
our website at www.w6-wertarbeit.de.
•
Use a W6 Super Stretch 90 (HAx1SP) needle for stretch and non-
stretch fabrics or a W6 Super Stretch 75 (HAx1SP) needle for thinner
fabrics. If necessary, install a special needle.
•
You are using W6 plastic bobbins and thread tension-friendly and lint-free
W6 thread.
•
The presser foot that matches the pattern is installed.
Carry out the following steps:
1. Set the ‹presser foot lifter› to the upper position.
Then press the ‹Needle Up / Needle Down› button.
W6 note
Please note: It must be ensured that the thread take-up lever, covered by the
face plate, and the needle are in a specific position before threading and
changing any programs.
117