W6 N 9500C QPL Manual Download Page 71

Page: 71 / 281

Threading the upper thread

What do I do with the upper thread?

Fasten the spool using the spool cap.

Gently

press the

spool

onto the

spool pin

and

always

move

the

spool into

horizontal

(lying)

position.

PLEASE

NOTE

Failure to

do place

the spool

in a

horizontal

position

will lead

uneven

thread

tension.

The

seam

pattern is

wrong.

Unwind approx. 60 cm of thread from the W6 WERTARBEIT

upper thread spool.

When doing so, hold the spool firmly in the right hand.
The spool must not be released.

First guide the thread around the back of the metal thread guide.

The thread slips into the thread guide opening, when you
pull the thread forwards towards you.

Summary of Contents for N 9500C QPL


























































































































































































































































































Search results

Summary of Contents for N 9500C QPL

Reviews:

Related manuals for N 9500C QPL

Brands by name

Popular brands

W6 N 9500C QPL, Manual

Search results

Summary of Contents for N 9500C QPL

Reviews:

Related manuals for N 9500C QPL

Brands by name

Popular brands