W6 N 9500C QPL Manual Download Page 176

Page: 176 / 281

Freehand embroidery: program 001

Using a pattern

Clamp the fabric and stabiliser with the sketched embroidery design
in a freehand embroidery frame.

The W6 freehand embroidery frame is not
supplied with the sewing machine.

Place

the

embroidery frame under the needle and lower the presser foot.

10.

Start

the

machine

medium

speed

and

guide the

frame

carefully

that the

needle

moves

along the

pattern’s

drawn

edges.

» The pattern has been embroidered.

W6 note

Remember to raise the feed dogs again, please see “Operating elements” >
“Drop feed lever”.
Press the lever; to raise the feed dogs.
Turn the hand wheel five times forwards towards you.
The feed dogs have been raised again.

176

Summary of Contents for N 9500C QPL


























































































































































































































































































Search results

Summary of Contents for N 9500C QPL

Reviews:

Related manuals for N 9500C QPL

Brands by name

Popular brands

W6 N 9500C QPL, Manual

Search results

Summary of Contents for N 9500C QPL

Reviews:

Related manuals for N 9500C QPL

Brands by name

Popular brands