W6 N 9500C QPL, Manual

Page: 126 / 281

Utility stitches
Using a pattern
Carry out the following steps:
1. Set the ‹presser foot lifter› to the upper position.
Then press the ‹Needle Up / Needle Down› button once.
W6 note
Please note: It must be ensured that the thread take-up lever, covered by the
face plate, and the needle are in a specific position before threading and
changing any programs.
Set the Presser foot to the upper position, the thread tension is then open. Press
the Needle Up / Needle Down button once. The thread take-up lever and needle
move to the correct starting position automatically.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, further
information can be found on www.w6-wertarbeit.de under Service / HELP:
Criteria for optimal threading.
The lower thread has been pulled taut and carefully to the 7 o’clock and 9 o’clock
positions in the silver slot of the black hook race. When pulling it in, you will hear
a definite clicking at the 7 and 9 o’clock positions.
The lower thread tension is active. You have performed a tension test.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, you can
obtain information on www.w6-wertarbeit.de under Service / HELP / W6 N
9500 Criteria for optimal threading.
Press the Needle Up / Needle Down button once,
if the presser foot is up.
Select the following settings:
Designation
Needle
position Prog.
No. Pattern Application Presser
foot Needle size
Stretch
Zigzag stitch 022 Overlocking fabric
edges; overcasting W6 90 or 75
Super Stretch
needles
(HAx1SP)
Thread tension setting
Stretch zigzag stitch settings
126