W6 N 9500C QPL, Manual, Page: 160 / 281

Sewing buttonholes with buttonhole foot II
Manual setting of buttonhole size program 019
Using a pattern
Press the Needle Up / Needle Down button once,
if the presser foot is up.
2. Place W6 stabiliser under the fabric so that the fabric is held in place and
the buttonhole seam will have a neat appearance.
3. Mark the
starting position,
the length
and the end point
of the
buttonhole on the fabric.
4. Select pattern program 019.
! Make sure that the buttonhole foot II is fitted.
5. Thread the upper thread through the opening in the buttonhole foot and
leave the upper thread on the left-hand side.
160