W6 N 9500C QPL, Manual, Page: 59 / 281

Winding a new W6 plastic bobbin
What do I do with the lower thread?
8.3 Winding a new W6 plastic bobbin
In the lid of the sewing machine there is a diagram showing the correct thread
path for winding a plastic bobbin.
Correct thread
path
W6 tip
Errors in
winding the
thread onto the
bobbin as well when inserting the it into the hook race will affect the thread
tension and seam appearance.
This may result in skipped stitches.
Thread the thread.
Prerequisite:
•
A new W6 WERTARBEIT upper thread spool is ready for use.
•
An empty W6 WERTARBEIT plastic bobbin is ready for use.
Required:
•
A pair of scissors
CAUTION Risk of injury posed by unexpected start-up
The foot controller is on the floor. This can lead to the machine starting up
unexpectedly if the foot controller is activated by, for example, a child, a
sufficiently heavy pet or accidental contact.
➔
Always unplug the power plug before changing the presser foot.
PLEASE NOTE Material damage
If bobbins made by other manufacturers are used, this can result in damage to
the machine and a seam with an unsatisfactory appearance.
➔
Only use W6 WERTARBEIT plastic bobbins.
Carry out the following steps:
1. Set the ‹presser foot lifter› to the upper position.
Then press the ‹Needle Up / Needle Down› button once.
W6 note
Please note: It must be ensured that the thread take-up lever, covered by the
face plate, and the needle are in a specific position before threading and
changing any programs.
59