W6 N 9500C QPL, Manual

Page: 49 / 281

Changing the presser foot holder, fitting special accessory feet
(to be purchased extra)
Changing the presser foot and presser foot holder
7. Push the metal spacer into the ‹walking foot› slot .
8. Turn the ‹hand wheel› forwards towards you to check that the needle
does not damage the ‹presser foot› with the selected stitch setting.
! Make sure that the presser foot or
special foot can work properly.
» The walking foot has been attached.
7 Selecting the needle
This section contains information on changing the needle:
•
Checking the needle (Section 7.1)
•
Inserting a needle (Section 7.2)
•
Needle and thread table (Section 7.3)
If the needle, fabric and thread are matched, your machine will sew smoothly. An
unsuitable needle forces the thread through the fabric instead of allowing it to
glide through smoothly. This results in the sewing thread breaking, being
damaged or the sewing machine skipping stitches.
For safety’s sake, always use original W6 WERTARBEIT needles.
7.1 Checking the needle
Safety instruction: Use of needles
Only use 130/705 H system needles from W6 WERTARBEIT.
Never use bent, worn or inferior quality needles.
Never use needles with bent or damaged tips.
49