W6 N 9500C QPL, Manual

Page: 190 / 281

Saving and sewing patterns, deleting pattern sequences
Using a pattern
10. Lower the presser foot.
11. Press the Start-Stop button or alternatively press the foot controller.
12. The pattern sequence is sewn.
13. Delete the pattern sequence by pressing the button
or the Memory button.
(The Memory button is deactivated when only the dashed line appears.)
The pattern sequence is deleted.
11.15.2 Selecting, saving a pattern template
and creating a mirror image of a pattern
As an example, we are going to use the flower design (#161).
W6 tip
Always place W6 stabiliser under the fabric so that the fabric is held in place
and the embroidery pattern produced is neat. Have you ever used our W6
multicoloured thread? You can achieve amazing effects with this.
Frequent sewers will find that the W6 titanium needles are particularly suitable for
embroidery.
Titanium needles are extremely durable and create perfect embroidery.
Prerequisite:
•
You have read the safety notes for this sewing machine, see “Safety
Notes”.
•
You have set up the machine in a safe place; see “Setting Up”.
•
You have connected the machine properly, see “Connecting the machine”.
•
You have threaded the sewing thread properly, see “Threading the upper
thread”. In this regard, also view the “Criteria for optimal threading of a
W6 N 9500 QPL” video that is just 4 minutes long under Service / Help on
our website at www.w6-wertarbeit.de.
•
Use a W6 Super Stretch 90 (HAx1SP) needle for stretch and non-
stretch fabrics or a W6 Super Stretch 75 (HAx1SP) needle for thinner
fabrics. If necessary, install a special needle.
•
You are using W6 plastic bobbins and thread tension-friendly and lint-free
W6 thread.
•
The presser foot that matches the pattern is installed.
Carry out the following steps:
1. Set the ‹presser foot lifter› to the upper position.
Then press the ‹Needle Up / Needle Down› button once.
190