W6 N 9500C QPL, Manual

Page: 232 / 281

Sewing stretch fabrics
Practical tips
W6 note
Please note: It must be ensured that the thread take-up lever, covered by the
face plate, and the needle are in a specific position before threading and
changing any programs.
Set the Presser foot to the upper position, the thread tension is then open. Press
the Needle Up / Needle Down button once. The thread take-up lever and needle
move to the correct starting position automatically.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, further
information can be found on www.w6-wertarbeit.de under Service / HELP:
Criteria for optimal threading.
The lower thread has been pulled taut and carefully to the 7 o’clock and 9 o’clock
positions in the silver slot of the black hook race. When pulling it in, you will hear
a definite clicking at the 7 and 9 o’clock positions.
The lower thread tension is active. You have performed a tension test.
•
Failure to do this will always result in a sloppy seam, blockages or
damage to the sewing machine. In the event of any lack of clarity, you can
obtain information on www.w6-wertarbeit.de under Service / HELP / W6 N
9500 Criteria for optimal threading.
Press the Needle Up / Needle Down button once,
if the presser foot is up.
2. Iron the edges of the fabric.
3. Tack the fabric.
4. In the case of very stretchy or wavy fabrics, place adhesive stabiliser (solid
or water-soluble) under the fabric to stabilise it.
232