background image

QUICKSTART

5.964-043.0 03/12

Warning

These are only brief instructions! Please read and comply with these instructions prior to using or servicing your 
appliance.

The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers 
for the operator and other persons.

Start up

1

A

A

Check if the battery plug is connected to the 
appliance.

2

A

B

A

Sit on the driver's seat.
Set main switch to “1”.

B

Check battery status.

Note

The device is equipped with a safety mechanism 
to prevent total discharge, i.e. when the permissi-
ble minimum capacity is reached, then the ma-
chine can only be driven and existing lamps can 
be switched on. In such a case, the battery mon-
itoring symbol on the control console glows red.

Drive the machine directly to the charging 
station; avoid any steep gradients in the 
process.

3

A

B

A

Loosen the star handle screws.

B

Push the seat back into the desired position.
Tighten star handle screws.

4

A

D

B

C

A

Place the detergent bottle into the device.
Close the bottle lid.
Insert the suction hose of the dosaging 
equipment into the bottle.

B

Open the cover of the fresh water reservoir.

C

Fill up fresh water (maximum 60 °C) until the 
lower edge of filling nozzle.
Close the cover of the fresh water reservoir.

Model without dosing equipment "Dose"

D

Pour in detergent.
Close the cover of the fresh water reservoir.

B140R

Summary of Contents for B 140 R






Reviews: