URAL Motorcycles 4320M, Operation Manual, Page: 284 / 321

- The plug connector of the rear lights, the number plate light, backing lights,
connections of the air-pressure sensors in balloons;
- Terminal connections of the failure sensor in the brake system and the light
switch STOP;
- Leading out pole terminals of the storage batteries with wire terminals.
Lubricate the external undyed surfaces of the front axle ball-units, open surfaces of
the transfer box stem and additional power takeoff with the thin coat of the lubricant Litol-24.
Lubricate open surfaces of the threaded joint, outside cabin door handle, frames of the
door vents, nozzles head of the window washer, headlight moldings, the chain gearing, the
driving screw, guide shafts, rolling elements of the roller winch of the wrench and the cable,
the carving couple hook-screw of the towing device with the preservation lubricant, and the
surfaces of stems with Litol-24 or grease.
Table 22 – Preservative and Protective Coatings
Purpose of the coating Name and composition
For conservation of the transmission
units
Preservation oil ТМ5-12рк
ТУ 38 101 844-88 or the combination of the transmission
oil ТСп-15К ГОСТ 23652-79 and 10% (by volume)
detergent АКОР-1
For conservation of the external
undyed and dyed surfaces and threaded
areas
Cannon grease ГОСТ 19537-83
For conservation of the plug
connectors and terminal connections of
the electric equipment
Petroleum jelly ВТ13-1 ТУ 38 101 180-76, lubricant
Litol-24 or grease
For coloring of the damaged metal
surfaces
Enamels МЛ 12 of orange, sand-colored, khaki colors
GOST 9754-76; enamels МЛ-152 of orange, sand-colored,
golden yellow colors GOST 18099-78; enamel МЧ-145 of
orange color GOST 23760-79; enamel МЧ-123 of black
color TS 6-10-979-84; enamel МС-17 of black color TS 6-
10-1012-78
For protection of tires, hoses,
transmission belts and other rubber
goods against light exposure
Combination of the aluminum dust and the light oil
varnish or the aluminum paste with the white spirit in the
ratio 1:4 or 1:5 (by weight). Chalk-casein composition:
combination of chalk 75 % (by weight), casein adhesive
20%, drowned lime 4.5%, sodium carbonate 0.25%,
phenylic acid 0.25%
Packing material for hermetization
and partial packaging
Paraffine paper GOST 9569-79, condenser paper
1908-82, impregnated with paraffine oil, double layer
packaging bituminized paper GOST 8828-75, bituminized
and tarred packing paper GOST 10354-82, rubber fabric
and etc.
Lubricate the tire irons supplied with the truck, internal sides of the socket wrench,
hole for the reamer holder, the probe, forcing screws with the preservation lubricant and pack
the mentioned goods in the paraffin or other type of paper.
249