URAL Motorcycles 4320M, Operation Manual, Page: 243 / 321

Scope of work Technical specifications
Recommended equipment,
devices and tools
Axle configu-
ration
4х4 6х6
Let the additional power
takeoff operate for 10 minutes
and check the pumping action
DOM (see paragraph “Dedicated
Equipment”, subparagraph “Ad-
ditional Power Takeoff”)
The presence of the
pressure oil pulsation in
the plug hole DOM.
Wrench 12x13 + +
Detach and purge contain-
ment system pipelines of brake
chambers with compressed air.
Pipeline and hose
blockage is not allowed.
Wrenches 11х13,
14х17, 22х24, box
wrench 22х24, combina-
tion wrench 14х14, sock-
et wrench 10, compressor
air hose.
+ +
When working with trailer,
check the condition of the thread
on the hook and the nut of the
towing device. If the thread is
deformed, substitute the hook and
the nut with the new ones.
Thread deformation is
not allowed.
Wrenches 22x24, box
wrench 24x27, socket
wrench 55, wrench for
hydraulic brake bleeding,
tire iron
+ +
Lubrication
Maintain the engine in ac-
cordance with the operation man-
ual for the engine.
Change the coolant in the
cooling system (see the operation
manual for the engine YAMZ).
Change in accordance
with the operation manual
for the engine.
+ +
Check and, if necessary,
ramp the oil level up to the
norm:
- in the drive gear of the lead-
ing axle;
Oil level should be be-
low the edge of the level-
fill opening. Oil leakage
through the plug is not
allowed.
Wrench 27x30, oil
dispenser of 133М mod-
el, waste cloth
+ +
- in the transfer box. The same Wrenches 17x19,
22x24, oil dispenser of
133М model, waste cloth
+ +
Change the brake fluid in the
hydraulic clutch linkage (one time
in five years, see Lubricants and
Hydraulic Fluids Charts)
Liquid level in the
tank should be 15-20 mm
below of the upper edge
of the inlet.
Container, waste cloth,
wrenches 8х10
+ +
216