URAL Motorcycles 4320M, Operation Manual, Page: 162 / 321

4.7 Cab, Trim Package and Platform
4.7.1 Cab
The cab of the cabover truck - two-seat, spring-mounted, equipped with the heat and
sound insulation, the spring-mounted driver seat and the passenger seat, the ventilation system,
the heating system and the heating system of windshields, the vehicle sun roof, sunscreens, the
wind shield wiper, the windshield washer, rear view mirrors, side view mirrors and wide-angle
mirrors, and also the forward view mirror and could be completed with the independent heating
unit.
The independent air heating unit Planar-4D-24 (or Airtronic D2 or D4) is located inside
the cab and on the right side as viewed in the direction of the truck motion. Fuel supply is provid-
ed out of the fuel tank.
Upon operation of the independent heating unit, it is necessary to follow requirements,
specified in the paragraph “Safety Requirements”.
Regulate spherical mirrors, providing the viewing area though them according to figures
124, 125, 126, 127, by loose tension bolts of holders and mirrors, and them fasten them properly.
1,4-rear view mirrors (right, left); 2-viewing area of road surface; 3-point of driver
’
s eyes
Figure 124 - Viewing area through outside rear view mirrors (II class)
1,4-wide-angle mirrors (on one holder of the II class); 2-viewing area of road surface; 3-point of driver
’
s
eyes
Figure 125 - Viewing area through wide-angle mirrors (IV class)
159