URAL Motorcycles 4320M, Operation Manual, Page: 251 / 321

Scope of work Technical specifications
Recommended equipment,
devices and tools
Axle configu-
ration
4х4 6х6
Lubricate the intermediate
bracket shaft of the clutch linkage
and the brake valve (upon every
Maintenance-15000).
Lubricate through oil
filet before the appear-
ance of the fresh lubri-
cant.
The same + +
Check oil level in the gear
casing of the winch and, if neces-
sary refill (see Lubricants and
Hydraulic Fluids Charts) (upon
every third Maintenance-15000).
Oil level should be be-
low the edge of the level-
fill opening. Oil leakage
through the plug is not
allowed.
+ +
Lubricate the chain wheel
gear of the roller winch (upon
every third Maintenance-15000).
Lubricate all full
length of the chain.
Waste cloth + +
Lubricate according to the
Lubricants and Hydraulic Fluids
(upon every third Maintenance-
15000):
- plain bearer of the winch
drum;
Lubricate before the
appearance of the fresh
lubricant.
Lever type grease gun,
waste cloth + +
- guide rollers axle;
- bushing rollers and holder-
body cavity of guide rollers of the
roller winch;
- working area of the driving
screw of the roller winch and the
guide shaft;
- block thorn
Lubricate axles
Apply the lubricant
The same
-«-
The same +
+
+
+
+
+
+
+
Lubricate propeller shaft slip
joints of the winch driving gear
(see Lubricants and Hydraulic
Fluids Charts) (upon every third
Maintenance-15000).
Lubricate through oil
filet before the appear-
ance of the fresh lubri-
cant.
Wrench 17х19, box
wrench 22х24, waste
cloth
+ +
Lubricate the seat working
area and the locking hook.
Lubricate through the
ball valve oiler.
+ +
Lubricate the clutch bearing
and yoke shafts bushing of the
clutch, if the greaser on the clutch
housing is present.
Lubricate through the
ball valve oiler, making
no more than three travels
of the syringe lever.
Lever type grease gun,
waste cloth
+ +
220