u-blox ZED-F9P Interface Description - Manual
Advance Information
RXM-PMREQ continued
Byte Offset
Number
Format
Scaling
Name
Unit
Description
4
U4
-
duration
ms
Duration of the requested task, set to zero for
infinite duration. The maximum supported time
is 12 days.
8
X4
-
flags
-
task flags (see
)
12
X4
-
wakeupSources
-
Configure pins to wakeup the receiver. The
receiver wakes up if there is either a falling or a
rising edge on one of the configured pins (see
)
Bitfield flags
This graphic explains the bits of
flags
Name
Description
backup
The receiver goes into backup mode for a time period defined by duration. Provided that it is not connected to
USB
force
Force receiver backup while USB is connected. USB interface will be disabled.
Bitfield wakeupSources
This graphic explains the bits of
wakeupSources
Name
Description
uartrx
Wakeup the receiver if there is an edge on the UART RX pin.
extint0
Wakeup the receiver if there is an edge on the EXTINT0 pin.
extint1
Wakeup the receiver if there is an edge on the EXTINT1 pin.
spics
Wakeup the receiver if there is an edge on the SPI CS pin.
UBX-18010854 - R04
Advance Information
Page 174 of 259
