manualshive.com logo in svg

u-blox ZED-F9P, Interface Description

The u-blox ZED-F9P module offers high-precision positioning with centimeter-level accuracy. Easily configure and integrate with your system using the Interface Description manual available for free download at manualshive.com. Gain in-depth insights on how to maximize the capabilities of your device for seamless navigation and tracking applications.

Share
Download
background image

u-blox ZED-F9P Interface Description - Manual

Advance Information

Table of Contents

Preface .......................................................................................................................................................... 1

1   Document Overview ........................................................................................................................... 1

2   Firmware and Protocol Versions ........................................................................................................ 1

2.1   How to Determine the Version and the Location of the Firmware .......................................... 1

2.1.1   Decoding the Boot Screen (for Protocol Version 24 and Above)....................................... 1

2.1.2   Decoding the output of UBX-MON-VER (for Protocol Version 24 and above) ................. 2

2.2   How to Determine the Supported Protocol Version of the u-blox Receiver ............................ 3

2.2.1   u-blox 9 Firmware and Supported Protocol Versions ......................................................... 3

3   Receiver Configuration ....................................................................................................................... 3

Interface Description.................................................................................................................................... 6

4   NMEA Protocol .................................................................................................................................... 6

4.1   Protocol Overview........................................................................................................................ 6

4.1.1   Message Format .................................................................................................................... 6

4.1.2   Talker ID................................................................................................................................. 6

4.1.3   Protocol Configuration ......................................................................................................... 7

4.1.4   Satellite Numbering .............................................................................................................. 8

4.1.5   Latitude and Longitude Format ........................................................................................... 8

4.1.6   Position Fix Flags ................................................................................................................... 9

4.1.7   Multi-GNSS Considerations................................................................................................. 10

4.1.8   Output of Invalid/Unknown Data ...................................................................................... 10

4.1.9   Messages Overview ............................................................................................................. 10

4.2   Standard Messages..................................................................................................................... 12

4.2.1   DTM...................................................................................................................................... 12

4.2.2   GBQ ...................................................................................................................................... 13

4.2.3   GBS ....................................................................................................................................... 13

4.2.4   GGA...................................................................................................................................... 14

4.2.5   GLL ....................................................................................................................................... 16

4.2.6   GLQ ...................................................................................................................................... 17

4.2.7   GNQ...................................................................................................................................... 17

4.2.8   GNS....................................................................................................................................... 18

4.2.9   GPQ ...................................................................................................................................... 19

4.2.10   GRS ..................................................................................................................................... 19

4.2.11   GSA..................................................................................................................................... 20

4.2.12   GST ..................................................................................................................................... 21

4.2.13   GSV..................................................................................................................................... 22

4.2.14   RMC.................................................................................................................................... 23

4.2.15   TXT ..................................................................................................................................... 24

4.2.16   VLW.................................................................................................................................... 25

4.2.17   VTG..................................................................................................................................... 26

UBX-18010854 - R04

Advance Information

Page iii

Summary of Contents for ZED-F9P












































































































































































































































































Reviews:

No comments

Related manuals for ZED-F9P

2gig Technologies GC3 Manual preview
GC3
Brand: 2gig Technologies Pages: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Brand: 2gig Technologies Pages: 2
G1SLE MK2 Alignment Manual preview
MK2
Brand: G1SLE Pages: 2
2VV AirGENIO SUPERIOR Manual preview
AirGENIO SUPERIOR
Brand: 2VV Pages: 27
Easy-Laser E540 Manual preview
E540
Brand: Easy-Laser Pages: 84
Easy Heat RS2 Installation And Operation Instructions preview
RS2
Brand: Easy Heat Pages: 4
Ebyte E180-Z5812SP Product Manual preview
E180-Z5812SP
Brand: Ebyte Pages: 35
VAT 620 Series Installation, Operating, & Maintenance Instructions preview
620 Series
Brand: VAT Pages: 26
National Instruments 9853 Getting Started Manual preview
9853
Brand: National Instruments Pages: 29
Eaton FC18 User Manual preview
FC18
Brand: Eaton Pages: 10
Idemia SIGMA Series Quick User Manual preview
SIGMA Series
Brand: Idemia Pages: 29
RKC INSTRUMENT FAREX SR MINI SYSTEM Communication Instruction Manual preview
FAREX SR MINI SYSTEM
Brand: RKC INSTRUMENT Pages: 82
oventrop 2104203 Operating Instructions Manual preview
2104203
Brand: oventrop Pages: 64
Modine Manufacturing Airedale Sentinel Quick Start Manual preview
Airedale Sentinel
Brand: Modine Manufacturing Pages: 2
U-Tron 6830-122-C10 Instruction Manual preview
6830-122-C10
Brand: U-Tron Pages: 8
Agilent Technologies G8600-68001 Field Installation Instructions preview
G8600-68001
Brand: Agilent Technologies Pages: 20
Sunlover SL6 ELITE Quick Start Manual preview
SL6 ELITE
Brand: Sunlover Pages: 2
CP Electronics AR-SG-4SM-W Product Manual preview
AR-SG-4SM-W
Brand: CP Electronics Pages: 12

Brands by name

Popular brands

Load more brands