u-blox ZED-F9P Interface Description - Manual
Advance Information
Bitfield outProtoMask
This graphic explains the bits of
outProtoMask
Bitfield flags
This graphic explains the bits of
flags
Name
Description
extendedTxTim
eout
Extended TX timeout: if set, the port will timeout if allocated TX memory >=4 kB and no activity for 1.5s.
5.9.17.5 Port Configuration for DDC Port
Message
UBX-CFG-PRT
Description
Port Configuration for DDC Port
Firmware
Supported on:
•
u-blox 9 with protocol version 27
Type
Get/Set
Comment
This message is deprecated in protocol versions greater than 23.01. Use
,
instead.
See the
Legacy UBX Message Fields Reference
for the corresponding configuration item.
Several configurations can be concatenated to one input message. In this case the payload
length can be a multiple of the normal length (see the other versions of CFG-PRT). Output
messages from the module contain only one configuration unit.
Header
Class
ID
Length (Bytes)
Payload
Checksum
Message Structure
0xB5 0x62
0x06 0x00 20
see below
CK_A CK_B
Payload Contents:
Byte Offset
Number
Format
Scaling
Name
Unit
Description
0
U1
-
portID
-
Port Identifier Number (= 0 for DDC port)
1
U1
-
reserved1
-
2
X2
-
txReady
-
TX ready PIN configuration (see
)
UBX-18010854 - R04
Advance Information
Page 71 of 259
