u-blox ZED-F9P, Interface Description

Page: 186 / 267

u-blox ZED-F9P Interface Description - Manual
Advance Information
Name Description
prValid Pseudorange valid
cpValid
Carrier phase valid
halfCyc
Half cycle valid
subHalfCyc Half cycle subtracted from phase
5.15.4 UBX-RXM-RLM (0x02 0x59)
5.15.4.1 Galileo SAR Short-RLM report
Message
UBX-RXM-RLM
Description
Galileo SAR Short-RLM report
Firmware
Supported on:
•
u-blox 9 with protocol version 27
Type
Output
Comment
This message contains the contents of any Galileo Search and Rescue (SAR) Short Return
Link Message detected by the receiver.
Header Class ID Length (Bytes) Payload Checksum
Message Structure
0xB5 0x62 0x02 0x59 16
see below
CK_A CK_B
Payload Contents:
Byte Offset Number
Format
Scaling Name Unit Description
0 U1 -
version
- Message version (0x00 for this version)
1 U1 -
type
- Message type (0x01 for Short-RLM)
2 U1 -
svId
- Identifier of transmitting satellite (see Satellite
Numbering )
3 U1 -
reserved1
- Reserved
4 U1[8] -
beacon
- Beacon identifier (60 bits), with bytes ordered
by earliest transmitted (most significant) first.
Top four bits of first byte are zero.
12 U1 -
message
- Message code (4 bits)
13 U1[2] -
params
- Parameters (16 bits), with bytes ordered by
earliest transmitted (most significant) first.
15 U1 -
reserved2
- Reserved
UBX-18010854 - R04 Advance Information Page 178 of 259