u-blox ZED-F9P Interface Description - Manual
Advance Information
CFG-VALDEL continued
Byte Offset
Number
Format
Scaling
Name
Unit
Description
1
X1
-
layers
-
The layers where the configuration should be
deleted from (see
2
U1[2]
-
reserved1
-
Start of repeated block (N times)
4 + 4*N
U4
-
keys
-
of the Configuration
Items to be deleted
End of repeated block
Bitfield layers
This graphic explains the bits of
layers
Name
Description
bbr
Delete configuration from the BBR layer
flash
Delete configuration from the Flash layer
5.9.25.2 Deletes values corresponding to provided keys within a transaction
Message
UBX-CFG-VALDEL
Description
Deletes values corresponding to provided keys within a transaction
Firmware
Supported on:
•
u-blox 9 with protocol version 27
Type
Set
Comment
Overview:
• This message can be used to delete saved configuration to effectively revert them to
defaults.
• This message can delete saved configuration from the Flash configuration layer and the
BBR configuration layer. The changes won't be effective until these layers are loaded into
the RAM layer.
• This message is limited to containing a maximum of 64 keys up for deletion; i.e. N is a
maximum of 64.
• This message can be used multiple times with the result being managed within a
transaction.
• This message does not check if the resulting configuration is valid.
• See
for details.
• See version 0 of
for simplified version of this message.
This message returns a UBX-ACK-NAK, cancels any started transaction, and no
configuration is applied:
• if any key within a transaction is unknown to the receiver FW
• if an invalid transaction state transition is requested
• if the layers bitfield changes within a transaction
UBX-18010854 - R04
Advance Information
Page 83 of 259
