TYM T194, Manual

Page: 86 / 169

3 - 6
OPERATiOn
17. METRiC FASTEnER(iSO) TORQUE CHART
Use these torques. Unless special torques are specified. Values are for UNF thread fastener, plated or un-plated as
received from supplier. Fasteners can be dry or lubricated with normal engine oil. Values do not apply if graphite.
Moly-disulphide or other extreme pressure lubricant is used.
nOTE
iSO Class no. 8.8 10.9 12.9
Bolt hed idenfitication (see note 1)
Bolt Size
LB FT nM LB FT nM LB FT nM
Min MAX Min MAX Min MAX Min MAX Min MAX Min MAX
M4 3 3 4 3 4 4 5
Because of the low ductility
of these fasteners, the
torque range is to be
determined individually for
each application.
As a general rule, the
torque ranges specified for
grade 10.9 fasteners can
be used satisfactorily on
1.9 fasteners
* M14 is not a preferred
Size.
M5 5 6 6.5 8 7 8 7.5 11
M6 8 9 10.5 1 11 13 15 17.5
M8 19 3 6 31 7 3 7 43
M10 38 45 5 61 54 64 73 87
M1 66 79 90 75 93 11 15 150
*M14 106 17 144 17 149 179 00 45
M16 160 00 17 71 30 80 310 380
M0 30 380 434 515 450 540 610 730
M4 500 600 675 815 780 940 1,050 1,75
M30 90 1,100 1,50 1,500 1,470 1,770 ,000 ,400
M36 1,600 1,950 ,175 ,600 ,580 3,090 3,500 4,00
T194(K0) RIDE ON LAWNMOWER-영문-0326 26 2018-09-11 오후 5:27:41