Trumpf BendMaster 150, Operator'S Manual

Page: 48 / 258

1. Planning aid
The planning aid provides an overview of the measures to be
taken and preparations to be made.
For details, refer to the corresponding sections of these installa-
tion conditions.
Time before the delivery
of the machine Planning criterion Measures
10 weeks Personnel and training ■ Appoint a member of staff to be responsible for
preparations for the delivery of the machine.
■ Appoint operating and service personnel and pro-
grammers.
■ Arrange training schedules for specialist personnel.
10 weeks Installation site ■ Determine the installation site of the machine, taking
into account the space requirements according to
the installation plan.
■ Check floor requirements:
−
Floor quality.
− Evenness.
− Oil-resistant floor without expansion joints.
■ Take the weight and dimensions of the machine into
account.
■ Check the requirements for ambient conditions:
−
Room temperature.
− Exposure to sunlight.
− Purity of the ambient air.
■
Check transport route, e.g.:
−
Gateway openings.
− Header heights.
− Cable rack heights.
− Shunting areas around corners.
At least 8 weeks Installation plan Confirm the final installation plan by signing it and
send back to TRUMPF.
8 weeks Electrical system
■
Install electrical connections at the installation site.
■ Lay the conductor cross-section and fuse protection
according to the legal requirements.
■ Have the work required for Teleservice carried out:
−
Install a telephone connection at the installation
site.
■ For network connection: install the network connec-
tion at the installation site.
6 weeks Compressed air supply ■ Arrange for the installation of the compressed air
supply at the installation site.
−
Take into account connection, purity, com-
pressed air requirements.
3 weeks Transport Provide auxiliary transport equipment.
Note: If the machine is conveyed to the customer's site
by Technical Service, the required means of transporta-
tion and auxiliary transport equipment is provided by
them.
2
‐
4
Planning aid - Version 10
B579EN