Trumpf BendMaster 150, Operator'S Manual

Page: 174 / 258

Stack mode Color
A stack full Red
A stack blocked Orange
Tab. 4-19
3. Press Display , Filter , All stacks . All stacks available in the
control are displayed.
or
Ø Press Display , Filter , Project stacks . The stacks of the
job opened on the Job page are displayed.
or
Ø Display Display , Filter , Running project stacks . The
stacks of the currently loaded job are displayed.
6.10 Processing stacks
Condition
■ A stack has been selected.
Risk of collision if the stacking mode is changed in an
interrupted program!
Ø Before restarting the program, move the BendMaster man-
ually to a collision-free position (e.g. zero position).
Loading or unloading stacks no longer used can be deleted.
Active stacks must first be deactivated before they can be
deleted.
1. Press Process , Delete stack .
or
Ø Press Process , Delete all stacks .
Empty loading stacks and full unloading stacks are no longer
used by the control because no blanks can be picked up or set
down there. These stack statuses can be changed manually in
the control.
2. Press Process , Lock/unlock stack . The stack mode is
changed:
−
At a stack height >0 mm: from L stack empty to L coordi-
nate OK .
− At a stack height >0 mm: from L stack empty to L no
coordinate .
− From A stack full to A stack ready .
4
‐
80
Running in a TruTops program 2015-06-01
B579EN
Displaying stacks
NOTICE
Delete stack
Enabling a stack