Trumpf BendMaster 150, Operator'S Manual

Page: 168 / 258

Fig. 59300
Note
Since the search results must include the height measuring
point, it must be positioned on the stack to be searched for.
Rough detection may be carried out both in a defined search
area and in the complete search area.
For a rough recognition in the complete search area, the com-
plete blank must be within the displayed search area.
5. Press Find stack .
6. Enter the approximate stack height ±50 mm (stack height
only, without transport medium).
7. Press OK .
The height is measured at the position previously defined.
The rough recognition process is then performed on the
stack. The search results found are displayed after the rough
recognition:
4
‐
74
Running in a TruTops program 2015-06-01
B579EN
Rough recognition in the
entire search area