Trumpf BendMaster 150, Operator'S Manual

Page: 161 / 258

Tip
The starting point for positioning a pallet can also be indicated
with the laser cross.
Copying an area
1. Select the area to be copied:
Ø Mark the area to be copied under "Active Areas".
or
Ø Press the desired area in the diagram.
2. Press Area , Copy .
The values of the selected area are adopted as proposal.
The following mask appears:
Fig. 35718
3. Enter "name".
Tip
Use descriptive names.
4. Enter the Z and X coordinates of the area's starting point
(bottom left) (see "Fig. 46232", pg. 4
‐
64) .
Tip
If the sheets of the loading stack are larger than the pallet, a
larger loading area must be defined accordingly.
B579EN
2015-06-01 Running in a TruTops program
4
‐
67