Trumpf BendMaster 150, Operator'S Manual

Page: 219 / 258

1. > Diagnostics menu, press "BV diagnostics".
2. Press Save CDB to save the image last recorded of the
selected job.
3. Decide whether the fine or coarse exposure is to be saved.
Restarting the program
1. > Diagnostics menu, press BV diagnostics .
2. Press BV restart . The image processing software is restarted.
9.3 Teleservice
1. Change to the TOS user interface with <Alt>+<Tab>.
2. Press
MMI .
3. Press Teleservice . The following window opens after a short
while:
Fig. 40876
A TRUMPF service engineer can now dial into the BendMas-
ter via teleservice.
B579EN
2015-06-01 Error handling
4
‐
125