Trumpf BendMaster 150, Operator'S Manual

Page: 211 / 258

Precise position recording of insufficient quality Fig. 52329
CAD data is used to generate the position recognition models.
These CAD data contains both a reference point and the contour
information to be searched for in the recorded image.
The reference point defines two things:
■ The position resulting from the position recognition process.
■ The current position of metal.
Since the model is used for position recognition in the recorded
images, the contour of the CAD data must match the contour of
the parts to be identified as precisely as possible.
Fine position model from CAD data Fig. 51858
There is a position recognition program that can be used both
for the rough and fine position processes. This program cannot
only define the X/Y position, but also the rotation and change in
size.
B579EN
2015-06-01 Error handling
4
‐
117
CAD data import
Position recognition