17. If the processing sequence has been set, press
Adopt
.
The stack mode of the stack executed first is changed to
L
stack active
or
A stack active
.
Note
Manually activated stacks remain in
L stack active
or
A stack
active
stack mode.
6.11 Creating a tooling plan
Checking the TruTops tooling plan
1. In the "Stack layout" mask Press
Continue
..
or
Ø
press >
Set up
>
Tooling plan
.
2. Press
Setup plan
. The setup plan created in TruTops Bend is
displayed:
Fig. 39936
3. Load the bending machine according to the tooling plan.
4. To display the gripper information: press
Gripper
. The gripper
plan is displayed:
5. To display the parts data: press
Parts data
drücken. The
data is displayed.
6. To display the original loading positions programmed in Tru-
Tops: press
Load/unload
. The information is displayed.
4
‐
84
Running in a TruTops program
2015-06-01
B579EN
Summary of Contents for BendMaster 150
