Trumpf BendMaster 150, Operator'S Manual

Page: 200 / 258

Area type Description
Load Search exact If programmed, the BendMaster directly performs the fine recognition proc-
ess and picks up the parts.
The BendMaster obtains the information about the position, orientation and
height of the stacks from the storage management software.
Load Search automatic At the beginning of each stack, a coarse and then a fine recognition proc-
ess are automatically performed and then the stack is completely exe-
cuted.
Load Search Manual The operator performs the rough recognition process manually.
Intermediate layer search exact If present, the BendMaster directly picks up an intermediate layer.
The BendMaster obtains the information about the position, orientation and
height of the stacks from the storage management software.
Intermediate layer search automatic If present, a rough recognition process is performed at the beginning of
each intermediate layer stack and the stack is then completely executed.
Intermediate layer search manual The operator performs the rough recognition process manually.
Area types, receiver Tab. 4-28
Moving a storage cart manually
1. Move the BendMaster into the parking position.
2. Open the lift gate at the lift gate control.
3. Move the storage cart manually using the control panel of
the storage control system.
Moving the BendMaster semi-automatically
Conditions
■ The > Set up > Areas menu is open.
■ The system is ready for operation in automatic mode.
■ BendMaster is ready for operation (the GREEN button was
pressed, and the "BendMaster“ icon is green).
1. Press Display , Details .
2. Select a storage station from the drop-down menu.
4
‐
106
Running in a TruTops program 2015-06-01
B579EN
Selecting the storage station