Trumpf BendMaster 150, Operator'S Manual

Page: 117 / 258

or
■ Automatic mode: BendMaster is ready for operation (the
GREEN button was pressed, and the "BendMaster“ icon is
green).
1 Axis or coordinate move
coordinate system
2 MOVE COORDINATE SYS-
TEM button
3 Speed button
4 Traverse buttons
5 Button for DISPLAYED
COORDINATE SYSTEM
Fig. 33201
1. Press the MOVE COORDINATE SYSTEM button repeatedly
until the desired move coordinate system is set. The move
coordinate system currently set is displayed in the header.
There are six different move coordinate systems which can
be used to move the BendMaster axes
(see "Tab. 4-4", pg.
4
‐
26) .
2. Set coordinate system
Ø Press repeatedly until the desired displayed coordinate
system is set.
There are four different coordinate systems displayed
which can be used to display the axis positions of the
BendMaster in the
Position menu.
or
Ø > Position Press > Position .
Ø Under "Coordinate system", press ▼.
Ø Select the desired coordinate system.
B579EN
2015-06-01 Operating the BendMaster
4
‐
23
Translating axes