Trumpf BendMaster 150, Operator'S Manual

Page: 47 / 258

Who does what?
All the conditions described in this chapter must be fulfilled
before the machine is delivered.
If this is not the case, Technical Service will not be able to put
the machine into service.
Note
During start-up, the main switch on the machine may only be
switched on by Technical Service.
The machine is put into service by Technical Service.
Start-up includes:
■ Installing, aligning, leveling and securing the machine.
■ Connecting the machine to the supplies (with the exception
of the electrical power supply).
■ Putting the machine into service.
■ Performing a functional test.
■ Instructing personnel.
B579EN
BendMaster installation conditions (60)/(150) -
Version 10
2
‐
3
Customer
Technical Service