Trumpf BendMaster 150, Operator'S Manual

Page: 109 / 258

Creating BIO (BendMaster Information
Object)
After system crashes, collisions and fatal errors, a BIO file
should be created, which can be used by the Development
department to draw conclusions regarding the cause of an error.
Not only the control data is saved to a BIO file, but all machine-
relevant data for the purpose of fault analysis.
Ø Press Write BIO .
The BIO file is saved to the visual PC in the released direc-
tory: 'C:\xChange\BIO' as a ZIP file. The file name consists
of the date and time of creation. BIO files no longer required
should be deleted.
Creating and modifying users
1. In the menu, select > Service > > User configuration . The fol-
lowing mask appears.
Fig. 51840
2. Press New . The "User configuration" mask appears.
3. Define the settings:
− "User": enter the name of the new user.
− "Default user" (only for the operator user group): The
user is automatically logged on after a delay time of 10 s
if the check mark is set.
− "Password": enter twice to avoid input errors.
B579EN
2015-06-01 Operating the BendMaster
4
‐
15
Creating a new user