Trumpf BendMaster 150, Operator'S Manual

Page: 76 / 258

4-axis sensor gauge finger
Sensor gauge finger on 4-axis backgauge Fig. 59277
The middle part of the gauge finger protrudes slightly on the
face side and at the bottom support and can be pressed in.
The BendMaster presses the workpiece to be bent against the
sensor gauge finger. The control releases the press beam for
bending only once the workpiece rests properly against the sen-
sor finger.
It cannot be positioned against the top support of the gauge fin-
ger in BendMaster mode.
3
‐
12
The most important assemblies 2015-06-01
B579EN