Toyota ZZT230 series, Repair Manual

Page: 614 / 821

)
)
Dl-403
DIAGNOSTICS
-
SUPPLEMENTAL RESTRAINT SYSTEM
3
Check alrbag sensor assembly.
PIT Squib (RH)
Airbag
Sensor
() -H-
P
M
R-
DLC3 DTC 80132/61
H01020
�·�
AB0116A00119
HIOOOO HOI079
H10623
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
(b) Using a service wire, connect
PR+
and
PR-of the con-
nector (on the seat belt pretensioner side) between the
seat belt pretensioner (RH) and the airbag sensor assem­
bly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
(a) Turn the ignition switch to ON and wait at least for 20 se­
conds.
(b) Clear the DTC stored in memory
(See step
5
on page
Dl-326).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se­
conds.
(e) Check lhe DTC (See page Dl-326).
OK: DTC
80132/61
Is not output.
HINT:
Codes other than code 80132/61 may be output at this time, but
they are not relevant to this check.
Replace alrbag sensor assembly.